These products are blowing our minds. Here’s how:
1. They’ll save you money, lots of it.
ClimateCraft’s BalanceStream™ allows you to operate at higher efficiencies over the entire operating range and increases your ability to run at lower loads while reducing your need for reheat in VAV applications. This innovative technology is a spring actuated inlet cone that allows stable operation down to 10% of design. It prevents fan surge and requires no additional complex fan cycling control strategies. It enables 90% turn-down on direct drive VFD controlled fans, maintains set static pressure with one moving part, and acts as an automatic backdraft damper if a fan fails.
2. They are the best bang for your buck.
FlexSpeed™ motors are the first of their kind. They are designed to power fan arrays with variable frequency drives (VFD’s). This technology allows for better payback over the life of the motor as a result of higher operating efficiency and a longer anticipated service life. FlexSpeed uses 3% less power than a general purpose motor over entire operating range. Motor maintenance is reduced and reliability is increased since FlexSpeed motors run cooler resulting in a longer motor life.
3. No leaky cabinets.
With ClimateCraft’s Cabinet Construction, you’ll never lose air again. The cabinets have a unique standing seam construction and a 0.5% leak rate at 12” of static pressure. Here’s the game changer: ClimateCraft products are built with integral air seals throughout so not only do their cabinets not leak, neither do the internal coil, filter or fan sections. These seals are created using thick rubber gaskets and smart framing so you can say goodbye to all of that caulk. Need to replace a coil or coil external panel? No problem, they still won’t leak after repair.
4. They’re revolutionary.
One of the most cost-effective strategies to reducing air flow disruptions in a space due to mechanical failures is to use multiple fans in each air handler. The issue with this is sizing them correctly for 100% redundant capability without using very costly, fully redundant AHU’s. ClimateCraft solved this problem. FanMatrix™ fan array towers are designed to balance longevity with operational costs. The inertial base design eliminates fan harmonic vibration damage that occurs to fans operating within normal fan arrays. Similar to your vehicle, FanMatrix towers can also include MatrixMonitor™ to indicate smart lubrication intervals as well as monitor air flow and fan vibration using tri- axial accelerometers.
Woah, they’re good.
5. Complicated installations are easy.
Do you have a worn out, inefficient air handler installed in a small space with limited accessibly? Inevitably, this unit will need to be replaced. Don’t fret, ClimateCraft has a solution for you: ACCESS™. ACCESS is an engineering and manufacturing process for knock-down air handling units designed for simple and rapid field assembly at your job site. These units are specifically engineered to fit through doorways and can handle up to 60,000 CFM. The units ship to the job site on individual pallets including thorough installation instructions and barcodes for easy replacement. No field disassembly is required and the components are designed to navigate tight spaces, narrow corridors and sharp corners.
Interested in learning more mind-blowing facts about ClimateCraft products? Visit: http://www.climatecraft.com/ and Contact Us to learn more, setup a demo or a tour of the ClimateCraft factory.
